Use PPI resources information from SoftDevice when it is present.

Co-authored-by: Krzysztof Chruściński <[email protected]>
Signed-off-by: Eivind Jølsgard <[email protected]>
(cherry picked from commit 9b21d44)

The PSA is a cryptographically secure random number generator.

It will be enabled by default, eventually,  For now, enable it manually.

Signed-off-by: Gordon Klaus <[email protected]>
(cherry picked from commit ea9188b)

Same as commit 6ec9d10 but with the REQUIRED keyword on its own
line to attempt to avoid a merge conflict when reverting/reapplying
this patch.

Signed-off-by: Jonathan Nilsen <[email protected]>
(cherry picked from commit 8c2d815)

Initial implementation of nRF54L quirks necessary for nRF54LM20A.
To be upstreamed after TODO comments are resolved.

Signed-off-by: Tomasz Moń <[email protected]>
(cherry picked from commit f35ea13)

Necessary changes for NCS CI.

- Add a Jenkinsfile
- Add a commit-tags workflow: This enables sauce tag checking in sdk-zephyr
- compliance.yml: Disable check for merge commits, since we have upmerges
downstream. Also, since in the code we refer to Kconfig symbols that are defined
in the sdk-nrf repository, the Kconfig checks ((SysBuild)Kconfig,
(SysBuild)KconfigBasic and (SysBuild)KconfigBasicNoModules) will not pass so
exclude them. Also, disable any maintainers-related checks
- scripts/gitlint: Extend the max commit line lengths for Gitlint to account
for sauce tags
- Adapt to the changes in:
nrfconnect/action-commit-tags#4

Signed-off-by: Carles Cufi <[email protected]>
Signed-off-by: Dominik Ermel <[email protected]>
Signed-off-by: Martí Bolívar <[email protected]>
Signed-off-by: Vinayak Kariappa Chettimada <[email protected]>
Signed-off-by: Krishna T <[email protected]>
Signed-off-by: Dominik Ermel <[email protected]>
(cherry picked from commit 0648e72)

Adds symbols used in NCS to the sysbuild Kconfig allow list

Signed-off-by: Jamie McCrae <[email protected]>
(cherry picked from commit 37bd53a)

…in dBm

The nrf-802154 component of hal_nordic is updated.
The CCA threshold configuration is now done in dBm units, instead of
hardware-dependent scale.
Fixed a bug, where the CONFIG_NRF_802154_CCA_ED_THRESHOLD units were
different from the NRF_802154_CCA_ED_THRESHOLD units. Now all
configuration is done in dBm.

Upstream PR #: 90795

Signed-off-by: Rafał Kuźnia <[email protected]>
(cherry picked from commit ba8fd23)

nrf-squash! [nrf noup] modules: hal_nordic: adjust nrfx reservations to NCS
nrf-squash! [nrf noup] modules: hal_nordic: use Kconfig symbols in NCS reservation
nrf-squash! [nrf noup] modules: hal_nordic: nrfx: Add SoftDevice PPI resources

Add peripherals used by MPSL and SDC on nRF71-series matching nRF54L.

Signed-off-by: Aleksandar Stanoev <[email protected]>
(cherry picked from commit 666ecc8)

…ation

CONF_FILE parameter in testcase.yaml overwrites board
specific configurations. Change it to EXTRA_CONF_FILE
to apply both configurations.

Signed-off-by: Michał Stasiak <[email protected]>
(cherry picked from commit 72623f9)

… 3.12.0

New nrfx release contains MDK 8.71.1
and various fixes for nRF devices.

Signed-off-by: Nikodem Kastelik <[email protected]>
(cherry picked from commit f46798f)

…ration

Some nRF devices allow to configure burst setting per channel
while others globally.

Signed-off-by: Nikodem Kastelik <[email protected]>
(cherry picked from commit 5abf43c)

Some nRF devices do not allow to configure gain.

Signed-off-by: Nikodem Kastelik <[email protected]>
(cherry picked from commit 647477c)

ZMS legacy enabled by CONFIG_SETTINGS_ZMS_LEGACY uses a different lookup
cache function that is optimized for Settings subsystem.

Signed-off-by: Riadh Ghaddab <[email protected]>
(cherry picked from commit d07064e)

… 3.12.1

New nrfx release contains fixes for SPIM and GRTC driver.

Signed-off-by: Nikodem Kastelik <[email protected]>
(cherry picked from commit 59334fa)

Allow to add an image-specific DTS overlay, that is applied based on the
FILE_SUFFIX.
Up to this point, it was possible to specify such Kconfig files
(sysbuild/<image>_<file_suffix>.conf),
but it did not work with dts overlays
(sysbuild/<image>_<file_suffix>.overlay).
This commit aligns the logic of finding configuration files for both
scenarios mentioned above.

Ref: NCSDK-NONE

Signed-off-by: Tomasz Chyrowicz <[email protected]>
(cherry picked from commit 13a0f05)

Allow more TWIS instances to be tested.

Signed-off-by: Michał Stasiak <[email protected]>
(cherry picked from commit f9be875)

For GRTC timer a longer timeout is required:
(2 ^ 32) * 2 * 1us

Signed-off-by: Adam Kondraciuk <[email protected]>
(cherry picked from commit d0785ce)

The HFXO used on nRF54L15 DK has the typical startup latency of 854us.

Upstream PR #: 90795

Signed-off-by: Rafał Kuźnia <[email protected]>
(cherry picked from commit 39076d5)

…ency

The clock startup latency is now obtained from the clock driver and the
nrf-802154 is now set to a value that matches hardware capabilities.

Upstream PR #: 90795

Signed-off-by: Rafał Kuźnia <[email protected]>
(cherry picked from commit 4b3f171)

Extended analog pins mappings for more nRF54L targets.

Upstream PR #: 91581

Signed-off-by: Michał Stasiak <[email protected]>
(cherry picked from commit bd990c5)

…calls to it

This is a follow-up to commit a068709.

As the SPIM_REQUESTS_CLOCK() macro changed the type of its parameter,
all of the calls to it need to be updated accordingly. Also the call to
DT_NODELABEL() needs to be removed from that macro as DT_CLOCKS_CTLR()
already returns a node identifier.

Signed-off-by: Andrzej Głąbek <[email protected]>
(cherry picked from commit ec06e63)

…STS is disabled

If `CONFIG_SYS_CLOCK_EXISTS=n`, then
`CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC` will likely not be defined at all.
Fix the compilation by moving the check for it being `== 0` to a
separate preprocessor #if statement.

Signed-off-by: Carles Cufi <[email protected]>
(cherry picked from commit 03f46db)

… fwid length

Commit sets max possible number of tx and rx segments
to not adapt them anymore.

Signed-off-by: Aleksandr Khromykh <[email protected]>
(cherry picked from commit a046f25)

Commit changes BT_MESH_DFU_FWID_MAXLEN option to be
compliant with BLE Mesh specification.

Signed-off-by: Aleksandr Khromykh <[email protected]>
(cherry picked from commit 2411238)

…rious empty macro

If SYS_CLOCK_EXISTS is not enabled, then the SYS_CLOCK_HW_CYCLES_PER_SEC
still gets created, but with no value. This causes the code generation
in misc/generated/CMakeLists.txt to create an empty assembly macro:

`.equ  CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC,`

which then causes a build error.

Disable SYS_CLOCK_HW_CYCLES_PER_SEC entirely when SYS_CLOCK_EXISTS is
disabled to fix this.

This is a follow-up to 03f46db.

Signed-off-by: Carles Cufi <[email protected]>
(cherry picked from commit 61cdcb3)

The help message for the wifi mode -s command indicates it sets
the Wi-Fi mode to station. However, the Zephyr Wi-Fi shell subsystem
was incorrectly using a get operation instead of set.

This commit corrects the behavior to properly set the Wi-Fi mode,
aligning the implementation with the help message.

Signed-off-by: Arunmani Alagarsamy <[email protected]>
(cherry picked from commit 0faba15)

Include nordic,nrf-nfct-v2 compatible in the option.

Signed-off-by: Krzysztof Chruściński <[email protected]>
(cherry picked from commit 2d82970)

Use nordic,nrf-nfct-v2 compatible in the main nrf54h20 devicetree
description.

Signed-off-by: Krzysztof Chruściński <[email protected]>
(cherry picked from commit b84dd5b)

… cpurad

NFCT is by default assigned to application so DT node does
not need to be enabled or reserved in DT to have access to
NFCT registers. On cpurad NFCT must be reserved to enable
register access and then antenna pins can be configured as
gpios.

Signed-off-by: Krzysztof Chruściński <[email protected]>
(cherry picked from commit 1dc42fc)

Per section 5.6.4 of the USB 2.0 standard, Isochronous Endpoints
are derived by the (2^(bInterval-1) * F) formula. The current
implementation uses the formula intended for Interrupt Endpoints.

Signed-off-by: Victor Brzeski <[email protected]>
(cherry picked from commit d9c7b19)
Signed-off-by: Tomasz Moń <[email protected]>

This commit adds a device-tree prop for the audio streaming
terminals to specify the bInterval values for the Isochronous
endpoints.

Signed-off-by: Victor Brzeski <[email protected]>
(cherry picked from commit e8638be)
Signed-off-by: Tomasz Moń <[email protected]>

This commit adds the following:
    * Sensor related usage IDs in the Sensors' page of the HID standard.
    * A HID usage macro that works with IDs of 2 bytes.
    * A macro to define the exponent in a report descriptor.

The values and naming came from the following document: https://www.usb.org/sites/default/files/hutrr39b_0.pdf

Signed-off-by: Zak Essadaoui <[email protected]>
(cherry picked from commit 41a83bd)
Signed-off-by: Tomasz Moń <[email protected]>

Add support for the HFCLK24M clock to the clock_control_nrf
device driver.

Signed-off-by: Bjarki Arge Andreasen <[email protected]>
(cherry picked from commit bb31960)
Signed-off-by: Tomasz Moń <[email protected]>

Adhere to Programming Guide with regards to when the DIEPCTL0.CNAK is
set. This allows the driver to survive abusive control transfers with
extremely short host timeouts.

Signed-off-by: Tomasz Moń <[email protected]>
(cherry picked from commit d590d27)

This reverts commit f2576c9.

Signed-off-by: Tomasz Moń <[email protected]>

Initial implementation of nRF54L quirks necessary for nRF54LM20A.

Upstream PR #: 92842

Signed-off-by: Tomasz Moń <[email protected]>
Signed-off-by: Johann Fischer <[email protected]>
(cherry picked from commit f48fd8fad88f5cdb8a6600cfc3c8b66980fe0378)

Avoid using the PPI channels that are currently reserved for Radiocore
through the default configuration found in `uicr_periphconf_table.c`.
Otherwise, the samples may build but will not work as expected.

Upstream PR #: 91826

Signed-off-by: Grzegorz Swiderski <[email protected]>
(cherry picked from commit bc26475c262d6dcb1ec1b4d8bf53bf4f262382dc)
Signed-off-by: Tomasz Moń <[email protected]>

It was observed that device ceases to work in Buffer DMA mode after GET
DEVICE QUALIFIER request is STALLed (when USB stack is limited to
Full-Speed only operation). The issue is due to missing dout feed.

Clear pending dout feed flag after bus reset (enumeration done) and
after stalled control read transfer to allow dout to be feed when
necessary.

Upstream PR #: 93103

Signed-off-by: Tomasz Moń <[email protected]>
(cherry picked from commit 83c6c402e206b7c68538594599ea495eb84ae967)

…frequencies

Disabled frequency set approximation algorithm for spim's with prescaler.

Upstream PR #: 92436

Signed-off-by: Michal Frankiewicz <[email protected]>

…requencies.

Added test cases for nrf chips for non standard frequencies.

Upstream PR #: 92436

Signed-off-by: Michal Frankiewicz <[email protected]>

Allows usage of settings when multithreading is disabled

Upstream PR #: 92886

Signed-off-by: Jamie McCrae <[email protected]>

…_alloc

nrf-squash! [nrf noup] Bluetooth: Mesh: zero randomization for friend's adv

bt_hci_cmd_create will be deprecated.

Signed-off-by: Olivier Lesage <[email protected]>

…/IW416 SoC

- Add support for default Annex-55 Bluetooth calibration data load
 for both IW612 and IW416 SoC.
- Add support for default Annex-100 Bluetooth calibration data load
 for both IW612 and IW416 SoC.

Signed-off-by: Nirav Agrawal <[email protected]>
(cherry picked from commit ffe8daa)

Use bt_hci_cmd_alloc() instead of the soon to be deprecated
bt_hci_cmd_create().

Signed-off-by: Johan Hedberg <[email protected]>
(cherry picked from commit c186a31)

Mark bt_hci_cmd_create() as deprecated (superceded by bt_hci_cmd_alloc()),
and update any references to the new function.

Signed-off-by: Johan Hedberg <[email protected]>
(cherry picked from commit a22a4b1)

…eate()

Add a note about bt_hci_cmd_create() deprecation and which API should be
used instead.

Signed-off-by: Johan Hedberg <[email protected]>
(cherry picked from commit 607ff85)

Add the resolve and get_startup_time call

Upstream PR #: 93141

Signed-off-by: Piotr Krzyzanowski <[email protected]>
(cherry picked from commit 632aad17eaab2a0fa50258b47d8732d37d274c08)

Commit 3c47f91 introduced alignment
validation in K_MEM_SLAB_DEFINE macros.
A couple PTP message slabs wer using alignment 8, while the size of
the elements wasn't a multiple of 8, causing a static assertion
failure.

Fix by changing the alignment from 8 to 4 bytes.

Signed-off-by: Benjamin Cabé <[email protected]>
(cherry picked from commit 222a601)
Signed-off-by: Robert Lubos <[email protected]>

… initialization"

This reverts commit de4fad1.

Signed-off-by: Krzysztof Chruściński <[email protected]>

…ization

The GRTC counter is not cleared at startup, therefore the
`last_count` variable needs to be initialized accordingly.
This change:
- Prevents overflow of the `sys_clock_announce()` int32_t parameter
- Ensures the correct uptime value, which should be reset during
  initialization

Signed-off-by: Adam Kondraciuk <[email protected]>
(cherry picked from commit e77f942)

…ister access

Speed up execution of the interrupt handler and sys_clock_set_timeout().
Sys_clock_set_timeout() can be called in two scenarios: from previous
timeout expiration handler or freely. If the former case fast path
can be used since CC value in the GRTC register just expired and it
can be used as a reference for CCADD setting. This is only a single
register write so it's much faster. In the latter a longer procedure
is applied which also happens in two variants. If value which is
set in CC is further in the future (e.g. K_FOREVER was set before) then
CC can be safely overwritten with a new value without a risk of
triggering unexpected COMPARE event. If value in CC is earlier than
the new CC value (if earlier timeout was aborted) then there is a
risk of COMPARE event happening while it is being overwritten.
That case requires long and safer procedure of setting CC.

Update hal_nordic with changes in the nrfx_grtc driver which are
needed for nrf_grtc_timer changes.

Upstream PR #: 87944

Signed-off-by: Krzysztof Chruściński <[email protected]>

Add stress test that randomly starts and aborts multiple timers
from various contexts. Test checks if timers do not expire prematurely.

Upstream PR #: 87944

Signed-off-by: Krzysztof Chruściński <[email protected]>